Pattern Brands

Finish It…: East & Easter Tunic

9 Comments

Well hello there! Long time no see. Hope you are all well.

I disappeared for a while because my Mom was diagnosed with aggressive late stage stomach cancer 🙁 Her whole stomach is now removed & she will need chemo going forward. I’ve been & will be on filial duty for a while. Unfortunately she’s on the other side of the world. So not much sewing is going to get done rest of this year. But here is one last project I managed to finish while my siblings take over for a couple of weeks.

This project was part of my Fix/Finish It June-July sewing plan. I had already finished all the machine work by the time I learnt about my Mom’s illness. I did consider taking the hand sewing with me. But it was just as well I didn’t, since trying to understand & speak Chinese all day long left me unfit to do anything else.

The Inspiration & Design

1-bs-2013-02-121_photoTo recap, this started out as the muslin for my self-drafted Tunic Block, which is essentially an experiment in going dartless with my Top Block.

Now the Tunic is another classic that deserves a place in almost everyone’s wardrobe. I like the vaguely ethnic variety. My starting inspiration for turning this muslin into a tunic was Burda 2013-02-121 Flared Tunic. What would you call this – Moroccan?

I also collected a bunch of other examples – both what I don’t like & what I do like. Sometimes it’s useful to compare the two to figure out what makes or breaks a design.

Nay
Nay
Maybe
Yeah
Yeah
Yeah

Mine ends up being a mishmash of the Burda original and the swirly soutache designs. The design details were made up as I went along, testing different ribbons & soutache/Russia Braid arrangements.

Style Shots & Mug Shots

East…
Easter!

The Pattern

  • Block: Self-drafted Tunic Block
    1. Tunic Bodice Block
    2. Basic vs Tunic Sleeve Block
  • Design changes:
    • Enlarged neckline: CB 0″ lower – Sides 1″ wider – CF 2″ lower.
    • Lengths used: Bodice bum length, Sleeves wrist length.
    • Widen sleeve hems by 7″ total, tapering to nothing at mid upper arm.
    • Added CF slit: Measured same 2-1/2″ up from my Block’s waistline as on Burda 2013-02-121 for bottom of slit.
    • Added side seam slits: Measured same 7″ up from hem as on Burda 2013-02-121 for top of slits.

Fabric & Notions Used

Construction Notes

  • I mostly followed the instruction for Burda 2013-02-121 with the following key exceptions:
    • 2-sew-closuresMy fabric was too heavy to make spaghetti button loops. So I used the soutache cord for the loops & hand-sewn this along with the flat buttons to the inside of the CF slits after rest of the tunic was done.
    • CF ribbon trims were stitched before the neckline seam so that the ends of the ribbons would be hidden in the neckline seam.
    • Sleeve & bodice hem trims were stitched before the hems were turn inside, again for a tidier inside finish.
    • 2-sew-soutache1The soutache embellishment were sewn by hand. I tried machine-stitching this as shown in this YouTube video, but found mine a bit too skinny, stretchy & otherwise unwieldy. I will try again some day on another project maybe with a wider soutache…

The Verdict

Somehow my tunic ends up also looking vaguely Chinese. I guess there is no escaping my DNA eh? 🙂

I’m fairly happy with the result though. Now I just need some bottoms to go with the tunic. Maybe it’s time to venture into trousers/pants making? OK, maybe next year. Mom comes first.

Finish It July: Candy Cane Halter Top

2 Comments

Yes, I’m done with fixing. Or at least I’ve had enough. But I’m still not in the mood for starting totally afresh. So my next project is a finishing project. As in finishing the last scraps of stripy knit I used for the Knit Top Block tests earlier in the year (Dartless Knit Top Block and Semi-fitted+Raglan Knit Top Blocks).

The Inspiration & Design

There wasn’t enough left for a normal T, even a sleeveless one. But there was just about enough for a strapless one, like the Bandeau Ruched Bust Top I just finished recently. My inspiration actually was an outfit from Burda 2013-13. (I already made a similar lace skirt. So now the stripy top. And yes, I’m plotting to eventually make the minty cardi as well!)

design
pattern base
inspiration: 1953 Butterick 6518
inspiration: Burda 2013-03

The stripy top isn’t available as a Burda pattern, and it looks like it’s a bustier top rather than a knit ruched bust top. But I thought the silhouette would be close enough. And I’m in no mood for drafting anything new & complicated. Being paranoid about tuby top over exposure, I decided to add halter straps as well.  This was partly inspired by 1953’s Butterick 6518 which is featured in Blueprints of Fashion: Home Sewing Patterns of the 1950s. (I plan to one day make something like that too!)

Style Shots & Mug Shots

WORN WITH: 1 & 4 Refashioned RTW pleated skirt; 2 TopShop Martha jeans; 3 Refashioned RTW A-line skirt; 5 Self-drafted lace skirt;

The Pattern

Block: Ruched Bust Tube Top
Fitting change: shaded triangle at CF underbust added back in.
  • Block: Self-drafted Ruched Bust Tube Top
  • Design changes:
    • Added contrasting band at neckline: rectangle measuring neckline length x 3/4″ folded + SA, cut on crossgrain.
    • Added halter straps: rectangles 2″ folded x length required to tie around neck CB, cut on crossgrain. This is positioned from front princess line outward towards the side seam.
    • Added removable bust padding: pattern is based on shelf-bra bust area with the triangular bit at CF underbust removed, and no SA added.
  • Fitting changes:
    • Added back the triangle at CF underbust that I had cut off for the Mustard version. I originally sewn this up without any fitting changes, forgetting that knit fabrics can behave differently. The Mustard fabric had much more stretch both direction & was more susceptible to gravity. So the triangle was surplus to requirement & ballooned unattractively underbust. In this fabric however, it was needed to get rid of unsightly draglines. I was going to live with the defect, but then thought it would be better to test the fix on this wearable scrap muslin make.

Fabric & Notions Used

Construction Notes

  • The construction is mostly the same as the Mustard version, with the following differences:
    • Removable bust padding: Each pad is two layers. Princess seam in each padding layer is sewn separately using butted zig-zag stitches. The two layers for each pad are then overlocked together at the outer edges.
    • Shelf Bra: This time I varied the bust dart position for the Fabric vs Power Mesh layer to avoid a build up of layers that shows through the outer layer. Fabric side seam is sewn at top SA & lower 1″ only, leaving a gap for the removable bust padding to be inserted/removed. The front SA at the gap is top-stitched in place. The back SA at the gap is sandwiched between the F&B SA of the Power Mesh side seam. Rigilene boning is sewn to this Power Mesh side seam SA, so again sandwiched between the two layers of the Shelf Bra.
    • Neckline: The band is stitched to bodice neckline wrong sides together. The knitted elastic short ends are stitched to the CF double layer Power Mesh, then stitched to the seam allowances of the band/bodice neckline. The straps are stitched to the band at the inner SA (long side/upper edge in the photo) & at the fold line. Shelf Bra neckline is then stitched to the band’s inner SA, flipped inside at the fold line, and top-stitched in the band/bodice seam ditch. CF is then gathered / pleated, and the tab folded over the band fold line / top edge & hand stitched inside like with the Mustard version.

The Verdict

I’m pretty happy with the design. Love the visual interest the perpendicular stripes of the neckline band & straps add. It’s a nice variation for Breton stripe. But…

I’m not convinced these variations of strapless tops really suit my short-waisted torso. The proportion isn’t flattering when they are worn tucked in. The ratio of exposed chest vs bodice vs lower half makes the torso look even more squashed. This one is slightly better than the Mustard version because the wide straps breaks up that expanse of exposed chest & make this look less like a strapless.

And my attempt at sweetheart neckline in these ruched bust tops are just not happening. I should have paid more attention to Stretch Pattern School’s lesson on tension line. The elastic at the neckline simply cannot keep the top up and dip in the CF at the same time. I will have to find other ways of keeping the neckline up if I want a sweetheart neckline.

Otherwise a decent effort don’t you think? 😉 A- then!

Fix It July: the Mustard lot

6 Comments

This lot was a bit of a bother. They required lots of unpicking. And lots of PITA unpicking at that (because of the stretch stitch used). Hence the continuation of my Fix it marathon into July. Let’s start with the least troublesome of the lot…

1. New & Improved!
McCall 6078 Cowl Neck T

AFTER
BEFORE
AFTER

This one just needed taking in at the side seams and shortening. It was a case of:

  • Picking the wrong pattern for my short-waisted torso. A loose but not flowy silhouette does nothing for my squarish upper-half. And I did have to wear this tucked in at the waist most of the time because of this second problem…
  • Thinking that I can fight gravity. I had to use the stretchiest grainline for the length of the top because I ran out of fabric. It was suppose to be hip length. But it grew & grew, but not enough to pass as a dress.

2. Emami / Bradbury Endless Dress
Many-Faced Skirt

BEFORE
BEFORE
BEFORE
AFTER
AFTER
AFTER
AFTER
AFTER

This one needed the Shar-Pei waistband/tube-bodice circu… shortened because…

  • The yoga-style Shar-Pei waistband look better on a pooch than on me.
  • The Mighty Weighty Skirt threatened the Tube Bodice with wardrobe malfunctioning.

I may have shortened it a bit too much. Originally I was still hoping for a Shar-Pei-less yoga-waistband wearing option, as well as a decent cowl/turleneck poncho wearing option. Needless to say that didn’t work.

In the end I had to end the Endlessness of this dress & commit to a proper waistband with elastic inside. I had a hard look at my lifestyle and decided that I’m never going to wear it as a Caped Crusading Poncho, nor as a more impractical version of Hammer Pants – imagine going to the loo in that! It’s still has some shape-shifting ability, but all are variations of skirts & apron skirts.

3. Self-drafted Bandeau Tube
Ruched Bust Top + convertible straps

Original

the Original bandeau

This one is the diva of the batch. It demanded a piece of flesh from both 1 & 2 above. Even then, parts of it still had to be laid out on the wrong grain.

The Inspiration & Design

inspiration

the Inspiration

design

the Design

Yes, I seem to have a thing for ruched bust. Maybe it’s because despite my psuedo-D-cup, I still manage to look rather flat chested from the front. No push-up bra has ever managed to give me a cleavage. While the bandeau band reinforces my lack of curves, I do like this Victoria Secret ruched bust bandeau bikini top. The cinching at CF adds the illusion of a much needed curve. So I modeled my remake on this, but added a panel below to turn it into a more practical tummy covering top.

  • I also added a shelf-bra with clear elastic at top (neckline) & bottom (underbust) as insurance against wardrobe malfunction. I wanted a pull over top, but I don’t trust this fabric to recover from putting on/taking off the top.
  • To further prevent sagging I copied the VS inspiration & adding boning to the shelf-bra’s side seams.
  • The shelf-bra has vertical bust darts which are suppose to be more supportive, but unfortunately they’re kinda visible through the top layer.
  • I wanted to add bust padding for more modesty. But I couldn’t figure out figure out a way to do so without restricting the stretchability.
  • I also copied the VS inspiration’s option for detachable strap. But as usual I couldn’t decide and end up with two adjustable length straps to give me more options.

The Mug & Style Shots

The Pattern

Fitting change: shaded triangle at CF underbust added back in.
Block: Ruched Bust Tube Top
  1. BLOCK: Stretch Pattern School Tankini Block for Stretchy Knits (-12%/0% ease). Since I want this wearable strapless, I thought the -12% ease block based on Stretch Pattern School instruction would be safer. BTW, I just managed to tracked down the author of Stretch Pattern School (patternschool.com). He’s writing a book that will contain all the info from that now defunct site plus more. I’m waiting for info on how to get on the notification list. Will let you know when I find out.)
  2. Pivot side seam bust dart into CF bust dart. Pivot additional 1cm from neckline to CF bust dart to ensure snug strapless fit (like the Stretch Pattern School instruction for ‘Palette Line Maillot/One-Piece’). CF bust dart will be gathered instead of sewn.
  3. Establish F&B neckline, hemline, & F underbust styleline.
  4. Separate F bust bandeau piece at underbust styleline, but extend CF up & down for additional CF gathering. (So both neckline & underbust styline become straight lines.) Remove additional 1/4″ width at CF to increase bustline tension & prevent saggy bust ruching.
  5. (During fitting, I had tweak the F bottom piece’s underbust styleline because I was getting excess fabric / bagging at CF underbust. I removed the pointy bit – what would be the bridge piece in a bra. The resulting underbust styleline is straight on the F pattern pieces, but curved when sewn up as intended by the design.)
  6. Drafted shelf-bra per Stretch Pattern School instruction forTankini shelf-bra:
    1. Using the same Tankini Bloc, pivot the side seam bust dart to waist seam bust dart.
    2. Establish neckline (this time CF curves down to busline) & hemline (underbust line).
  7. Rectangles for tab to cover the CF bust gathering / ruching, and for the detachable straps.

Fabric & Notions Used

  • Fabrics: All recycled from thebandeau tube + 1 & 2 above.
    • 4-way Stretch Viscose Cotton Lycra from Tia Knight/Tissu Fabrics.
    • Shelf-bra underlining: Lightweight Power Mesh from Tia Knight/Tissu Fabrics.
  • Clear elastic for neckline, shelf-bra bottom, and detachable straps.
  • Rigilene boning for shelf-bra side seams.
  • Strap notions: Bra hooks & sliders recycled from old VS bra. Hook loops at neckline: 3/8″ Satin Woven Elastic from Pacific Trimmings.

Construction Notes

  •  This is my first time using Rigilene boning. It’s not recommended for corsets with require sturdier construction to keep the soft bits tightly compressed. But for a stretchy top like this I just needed a little bit of shaping, so it seems good enough. Besides, I already had it in the stash.
  • To prevent the cut ends from poking I went overboard and used both options mentioned in Linda Sparks’ ‘The Basics of Corset Building’p21:
    • I slid the fabric portion down a bit to expose the plastic rods. Their tips are then melted using a tea light candle. The tips didn’t actually touch the flame – they started melting when they got near the flame. I flattened the melted tips a bit while they were still warm, then slid the fabric portion back up.
    • I also used scrap fabric to cover the ends after the boning has been sewn to the shelf-bra’s side seams.
  • To prevent the shelf-bra from flipping out, I had to tacked its bottom edge to the outer layer at the side seams and the bottom of the CF gathering / ruching tab. The loops for the straps to hook onto are sewn on before this is done so the stitches will be hidden from the outside.
  • I didn’t have bra straps in a matching color, so I had to make self-fabric straps. But as the fabric stretches in all direction, I added clear elastics inside to prevent them becoming too loose. I find this tricky as sometimes the elastic doesn’t lay flat & the strap gets a bit wavy. But once it’s on the body & slightly stretched this waviness isn’t so visible.

The Verdict

Was it worth all the trouble unpicking stretch stitches? I hope so. All three are more wearable now. Even the strapy top might be fine under a cardi or jacket for my relatively casual workplaces.

Yes, the fabrics are a bit ratty. But I like the color. And it makes the Environmentalist in me happier. We complain a bit about fast-fashion RTW being bad for the environment. But sometimes I wonder if we’re not just as bad since the process of learning to sew well may involve lots of failed projects and discarded fitting muslins. Plus the scraps from our projects might be harder to recycle especially if we sew with lots of different fibers. You don’t get the quantity of the same fabric that you’d get in RTW production waste. It makes me sad. So where possible I ‘upcycle’ my own makes despite having a huge fabric stash still waiting for their turn in the limelight.

Unravel-video-linkSpeaking of recycling…one of the sewing bloggers I follow (sorry, can’t find the post again for proper credit) shared a link to a fascinating documentary about an Indian community recycling our unwanted fast-fashions. It’s a short film by Meghna Gupta called Unravel. Some of these recycling ladies’ comments about the West are rather funny.

Watch it on a tablet or desktop as you’ll need to read the sub-title, but on a smartphone the timeline blocks the sub-title rather than disappear like on YouTube. Very silly.

Fix It June: Tote the II Forever!

2 Comments

Next up on my Fix It list: My replacement tote that’s barely six months old.

Self-drafted Tote v2

Sadly poor construction quality is not limited to fast-fashion RTW. Tote I lasted me almost two years. So it was definitely a WTF moment when the handle tabs on Tote II started doing this:

5-broken

I thought the thicker faux leather would last longer. I was wrong. I’m not exactly sure what happened, but here are my suspects:

  1. 5-compareDifferent D-rings I used this time have rectangular wire profile where as Tote I had rounded wire profile. Combined with heavy grocery maybe the pointier edge acts like knife edge.
  2. Lack of tab reinforcement from woven interfacing. Can’t remember whether I reinforced Tote I, but Tote II definitely needed this. And it needed a stiff interfacing at that. For these softer tabs keep shifting to the extra pointy corners of the D-rings.

I decided changing 1 would be too much hassle, so 2 it was then. Apart from a layer of old woven interfacing, I stiffened the center bit that goes around the D-Ring with a double layer of Ban-Rol (precut interfacing for waistbands that won’t collapse heightwise). I bought these long before I discovered that standard waistbands don’t like  my short-waisted torso. Now it finally found a use!

The replacement tabs had to be hand stitched and the stitching shows on the inside of the bag. Not brilliant. But at least functional. And thanks to an old-fashion thimble and needle grabber, I managed to do it without spilling blood.

While I was at it I tried to enlarge the zipper pull too. Clio was right that Lampo zippers are some smooth operators. And Don Morin was right that a large ring pull is a plus for practical zipped bags. My Lampo’s pull was lamentably anemic. My stash & trash yielded no matching ring pull of any sort, not even a keyring. So I end up wrapping the existing pull with a scrap from the tab redo. Hopefully this tote will now last me a while longer.

5-fixed

Fix It June: Sari Top

5 Comments

Or more correctly a “choli“.

So Me-Made-May set me on the path to Fix-It-June.
First to be sorta fixed is this choli top.


The pattern was self-drafted based on an earlier sloper, and didn’t account for breathing ease nor my uneven sloping shoulders. As with most alterations there is a limit to how much improvement that can be made. Here are the before & after mug shots.

Before Mug Shots

After Mug Shots

  • The left back side is now better after a sloping shoulder adjustment.
  • I can now breath after letting out tiny bits on all princess & side seams.

But I can still see fitting problems…The armholes feel a bit tight and there are draglines along the neckline pointing toward the shoulder tips. It’s as if the sleeves are pulling the neckline outward. I wonder if perhaps the lack of sleeve cap ease / shallow cap is the culprit.

sleeve-cap-ease My theory is that there’s not enough room in my sleeve cap to accommodate the roundness of my shoulder joints, so the sleeves want to pull the shoulder tips outward to compensate, and without a smaller neckline to counter-act this tendency the sleeves win, resulting in the neckline being pulled apart / outward. So what this top wanted was more like the left side in the picture below, but what I’m getting is more like the right side. (More on my sleeve block experiment here.)

It’s a shame I experimented first on the nicer of my two choli fabrics and made it in a rush for an occasion. This red one is silk and I think it came with the matching silk sari that I wore in the mug shots above. The other red one is cotton and might also have been bought as a set with the matching sari. I have another green cotton sari, but no matching choli fabric for it.

Saris: An Illustrated Guide To The Indian Art Of Draping by Chantal Boulanger Ja, I went through a sari-mad phase, but never mastered the art of sari-wearing. I even bought this fascinating book by anthropologist Chantal Boulanger called “Sari: An Illustrated Guide to the Indian Art of Draping“. It documents 100 different ways of sari draping worn by the various castes in different regions of the Indian subcontinent. Absolutely fascinating. And sad that some of these methods may soon be forgotten. Thankfully the book includes instructions & diagrams for these different drapes.

> You can sample few pages from the book here

In London you do see women wearing Saris on the street. And they always look so elegant regardless of their size, shape, or age. Even the impoverished ladies you see in documentaries about rural India look elegant in their sari. All that without complicated fancy sewing. Amazing.

Here are my not so brilliant attempts
at three of the drapes…

Sorry, flowers all sold out!
Sweetie, does my butt look big in this?
Flower Seller Sari from Madurai region, Tamil Nadu.

 

Karaikal Sari from Puducherry, Pondicherry

 

Nivi Sari, the mother of modern saris.

Maybe I should practice wearing saris more often.
It would certainly be a good justification for
my Sari & Not-So-Sari stashes! 😉